Magasonic
Industries manufacture Ultrasonic Digital Thickness Gauges meant for
precise measurement of wall thickness using ultrasonic echo
principle. The instrument is supplied with a probe and
Calibration Master for MS on which the instrument is to be calibrated
with a drop of oil as a couplant.
After calibration the instrument is ready to check thickness of MS
articles just from one side with use of
oil as couplant. The probe creates and transmits ultrasonic pulses
from the top surface of the test-piece
and after traveling through the material they are reflected at
the bottom surface back to the probe.
As speed of ultrasonic waves vary with material a Calibration Master for
that material ( other than MS )
is needed which is supplied as optional accessory.
The instrument
display's instantly the thickness of the test-piece with reading in
digits with accuracy
+ 0.1mm. It also find out thinning due to bending, forming,
drawing and detects manufacturing defects
like laminations, folds, voids in plates. It helps to find out the
remaining wall thickness of pipelines etc.
just from one side without counting the rust, scale formation on the
other side.
The Standard Probe
DG-210 supplied with instrument is used for plane and curved surface
like pipeline,
gas cylinder etc. for higher diameter objects. Low Curvature Probe
is used for smaller diameter pipelines and Finger Tip Probe is
meant for readings in congested areas.
LCD Models ( DT2-C & DT1-C ) have bright light as well as low
ambient light visibility are meant for
outdoor as well as indoor applications. LCD Models are recommended
which consumes less power as
compared to LED Models ( DT2 & DT1 ) unless measurements are
always to be taken in very dark areas.
ULTRASONIC PROBES :-
DG - 210 :
Standard Probe : For plane and externally curved surface like pipes,
cylinders of outer
diameter more than 50mm.
DC - 210 : Low Curvature Probe : For smaller diameter curved
surface like pipes with outer diameter
between 25 to 50mm.
DF - 206 : Finger Tip Probe : For closely spaced or congested
areas.
Type |
DG
- 210 |
DC
- 210 |
DF
- 206 |
Nomenclature |
Standard |
Low
Curvature |
Finger
Tip |
Thickness
Range in
Steel ( mm ) |
1.5
to 100.0 |
1.5
to 10.0 |
1.5
to 10.0 |
Surface |
Flat
& Curved ( Above 50mm in dia. ) |
Only
curved |
Restricted |
Curvature
Range
( mm ) |
OD
50mm & above |
OD
25 to 50mm |
OD
50mm & above |
Sensing
Face
Diameter ( mm ) |
10 |
10 |
6 |
Probe
Size ( mm )
Dia X Height |
Ø
15 X 30h |
Ø
15 X 30h |
Ø
11 X 40h |
Maximum
Surface
Temp. (C) |
-
25 to + 70 |
-
25 to + 70 |
-
25 to + 70 |
Couplant |
Ordinary
Oil,
glycerin. |
Ordinary
Oil,
glycerin. |
Ordinary
Oil,
glycerin. |
All probes are supplied
with cable and 5 pin connecter at one end.
TECHNICAL
SPECIFICATIONS
( IN STEEL ) |
Pocket
Models |
Portable
Models |
Models |
DT2-C |
DT2 |
DT1-C |
DT1 |
Measurement
Range |
1.5mm
to 100.0mm |
Measuring
Accuracy |
+
0.1mm |
Minimum
Thickness Measured |
1.5mm |
Probes |
DG-
210 - Standard ( 2 MHz ), Optional DC - 210 - Low Curvature,
DF - 206 Finger Tip. |
Test
Frequency |
2
MHz |
Batteries |
7.5V
DC i.e 5 No. of Pencil Size
( AA ) cells |
9V
DC i.e 6 No. of Medium Size
(C) cells. |
Low
Battery Indication |
Decimal
Point in display blinks |
Decimal
Point in display and front panel LED blinks. |
Dimensions
( Approx. ) |
80mm
X 155mm X 38mm
( W X H X D ) |
195
mm X 65 mm X 140 mm
( W X H X D ) |
Weight
( Approx. ) |
400
gm including batteries |
1.5
kg including batteries |
Display |
LCD |
LED |
LCD |
LED |
Due to continuous
improvement of our products we reserve the light of any modifications of
our
specifications without notice.
APPLICATIONS
Raw Material
Inspection |
} |
Chemical &
Petrochemical Industries. |
Fabrication |
} |
Agrochemical &
Fertilizer Industries. |
Quality Control |
} |
Pharmaceutical &
Drug Industries. |
Maintenance |
} |
Sugar Industries
& Distilleries. |
Corrosion and Erosion
Survey |
} |
Solvent Extraction
& Paper Industries. |
Pipelines,
Coils & Tubes |
} |
Boiler, Engg., &
Fabrication Industries. |
Pressure Vessels,
Reactors |
} |
Inspection &
Testing Authorities. |
Gas Cylinders,
Condensers, Boilers, |
} |
Shipping Industries
& Shipyards. |
Distillation
Columns,
Storage Tanks, |
} |
Thermal Powder
Stations & Electricity Boards |
Heat Exchangers,
Turbines, Shiphulls, |
} |
Refineries &
Railways |
Pumps, Valves, Rolled
Sheets, |
} |
|
Glass Containers,
Plastic Tanks & Parts. |
} |
|
OTHER PRODUCTS - Coating
/ Plating Thickness Gauge, Sound Level Meter,
Ultrasonic Flow Detector, Ultrasonic Probes, Ultrasonic Cleaners. |